 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MICROWAVE CORPORATION v01.0701 HMC154S8 GaAs MMIC SMT LOW DISTORTION T/R SWITCH, DC - 2.5 GHz Features High Third Order Intercept: +60 dBm Single Positive Supply: +3 to +10V High RF Power Capability TTL/CMOS Control Typical Applications The HMC154S8 is ideal for: * MMDS & WirelessLAN * Basestation Infrastructure * Portable Wireless Functional Diagram General Description The HMC154S8 is a low-cost SPDT switch in an 8-lead SOIC package for use in transmit-receive applications which require very low distortion at high signal power levels. The device can control signals from DC to 2.5 GHz and is especially suited for 900 MHz and 1.8 - 2.2 GHz applications. The design provides exceptional intermodulation performance; providing a +60dBm third order intercept at 8 Volt bias. RF1 and RF2 are reflective shorts when "Off". On-chip circuitry allows single positive supply operation at very low DC current with control inputs compatible with CMOS and most TTL logic families. 14 SWITCHES - SMT Electrical Specifications, TA = +25 C, Vdd = +5 Vdc, 50 Ohm System Parameter Frequency DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz 0/8V Control 0.5 - 1.0 GHz 0.5 - 2.0 GHz 0.5 - 1.0 GHz 0.5 - 2.0 GHz DC - 2.5 GHz tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 10 24 ns ns 22 19 15 20 14 10 35 34 55 54 Min. Typ. 0.5 0.7 1.0 25 22 18 30 18 13 39 38 60 60 Max. 0.7 0.9 1.3 Units dB dB dB dB dB dB dB dB dB dBm dBm dBm dBm Insertion Loss Isolation Return Loss Input Power for 1 dB Compression Input Third Order Intercept Switching Characteristics 0/8V Control 14 - 2 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v01.0701 HMC154S8 GaAs MMIC SMT LOW DISTORTION T/R SWITCH, DC - 2.5 GHz Insertion Loss 0 -1 -2 -3 -4 -5 0 1 2 FREQUENCY (GHz) 3 4 Isolation 0 INSERTION LOSS (dB) -10 ISOLATION (dB) -20 -30 -40 0 1 2 3 FREQUENCY (GHz) 4 Return Loss 0 14 SWITCHES - SMT 10 12 RETURN LOSS (dB) -10 -20 -30 -40 0 1 2 FREQUENCY (GHz) 3 4 Input Power for 0.1 and 1.0 dB Compression vs. Bias Voltage 45 1dB at 900MHz COMPRESSION (dBm) 1db at 1900MHz 40 Input Third Order Intercept vs. Bias Voltage 65 60 900MHz IP3 (dBm) 55 50 45 40 35 1900MHz 35 0.1dB at 900MHz 30 0.1dB at 1900MHz 25 2 4 6 8 BIAS (Volts) 10 12 2 4 6 8 BIAS (Volts) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 14 - 3 MICROWAVE CORPORATION v01.0701 HMC154S8 GaAs MMIC SMT LOW DISTORTION T/R SWITCH, DC - 2.5 GHz Compression vs. Bias Voltage Carrier at 900 MHz Bias Vdd (Volts) 3 4 5 8 10 Input Power for 0.1 dB Compression (dBm) 27 30 32 36 37 Input Power for 1.0 dB Compression (dBm) 31 34 36 39 40 Carrier at 1900 MHz Input Power for 0.1 dB Compression (dBm) 26 29 31 35 36 Input Power for 1.0 dB Compression (dBm) 30 33 35 38 39 Caution: Do not operate in 1dB compression at power levels above +35dBm and do not "hot switch" power levels greater than +23dBm (Vdd = +5V). Distortion vs. Bias Voltage 1 Watt Carrier at 900 MHz Bias Vdd (Volts) 3 4 Third Order Intercept (dBm) 43 48 53 60 60 Second Order Intercept (dBm) 71 85 90 90 90 Second Harmonic (dBc) 45 55 56 58 59 1 Watt Carrier at 1900 MHz Third Order Intercept (dBm) 42 46 51 60 60 Second Order Intercept (dBm) 78 88 87 90 90 Second Harmonic (dBc) 55 65 58 59 60 14 SWITCHES - SMT 5 8 10 Truth Table *Control Input Voltage Tolerances are 0.2 Vdc. Bias Vdd (Vdc) 3 3 3 5 5 5 10 10 10 5 5 Control Input* A (Vdc) 0 0 Vdd 0 0 Vdd 0 0 Vdd -Vdd Vdd B (Vdc) 0 Vdd 0 0 Vdd 0 0 Vdd 0 Vdd -Vdd Bias Current Idd (uA) 30 25 25 110 115 115 380 495 495 600 600 Control Current Ia (uA) -15 -25 0 -55 -100 -15 -190 -275 -220 -600 225 Control Current Ib (uA) -15 0 -25 -55 -15 -100 -190 -220 -275 225 -600 Signal Path State RF to RF1 OFF ON OFF OFF ON OFF OFF ON OFF ON OFF RF to RF2 OFF OFF ON OFF OFF ON OFF OFF ON OFF ON 14 - 4 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v01.0701 HMC154S8 GaAs MMIC SMT LOW DISTORTION T/R SWITCH, DC - 2.5 GHz Absolute Maximum Ratings Bias Voltage Range (Vdd) Control Voltage Range (A & B) Storage Temperature Operating Temperature -0.2 to +12 Vdc -0.2 to Vdd Vdc -65 to +150 C -40 to +85 C Outline Drawing 14 SWITCHES - SMT 14 - 5 NOTES: 1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED. 2. LEADFRAME MATERIAL: COPPER ALLOY 3. LEADFRAME PLATING: Sn/Pb SOLDER 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v01.0701 HMC154S8 GaAs MMIC SMT LOW DISTORTION T/R SWITCH, DC - 2.5 GHz Typical Application Circuit 14 SWITCHES - SMT Notes: 1. Set logic gate and switch Vdd = +3V to +5V and use HCT series logic to provide a TTL driver interface. 2. Control inputs A/B can be driven directly with CMOS logic (HC) with Vdd of 3 to 8 Volts applied to the CMOS logic gates and to pin 4 of the RF switch. 3. DC Blocking capacitors are required for each RF port as shown. Capacitor value determines lowest frequency of operation. 4. Highest RF signal power capability is achieved with V set to +10V. The switch will operate properly (but at lower RF power capability) at bias voltages down to +3V. 14 - 6 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v01.0701 HMC154S8 GaAs MMIC SMT LOW DISTORTION T/R SWITCH, DC - 2.5 GHz Evaluation Circuit Board 14 SWITCHES - SMT 14 - 7 List of Material Item J1 - J3 J4 - J7 C1 - C3 U1 PCB* Description PC Mount SMA RF Connector DC Pin 330 pF Capacitor, 0402 Pkg. HMC154S8 SPDT Switch 101786 Evaluation PCB The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and package bottom should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. * Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com |
Price & Availability of HMC154S8
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |